Yes, I confirmed with Pilot Automotive that the the Integrated OEM Tailgate Lock - Dodge Ram # LH-007 will fit your 2006 Dodge Ram (with an 8-ft. bed). The tailgate lock handle is compatible with both 8-foot bed quad cabs and 8-foot bed non-quad cab models. view full answer...
The Brophy Stake Pocket Tie Down, part # TDSF, requires a stake pocket to be used. It does not look like the Ramboxes have stake pockets, so this cannot be used. Even if there are, the Rambox setup increases the width of the bed walls so that normal stake pocket tie-downs won't fit.
For your 2011 Dodge Ram Pickup, you will need to go with a frame-mounted tie-down system. I've linked to the appropriate page for your vehicle. In the drop-down list, you will need to choose which option fits... view full answer...
First, thanks so much for your purchase from etrailer of the Tekonsha Voyager Trailer Brake Controller # 39510 for your 2010 Dodge Ram. The LED of the Voyager will not light up without a trailer connected.
There will be power to the controller without a trailer connected, but if you'd like to test it you can do so with Cordless Circuit Tester # PTW2979. view full answer...
The Gooseneck Trailer Hitch Installation Rail Kit - Dodge Ram Trucks # 4439 is not a fit for the Curt Hitch 61052 Folding Ball Gooseneck Hitch # C-52. Instead you will want to use the Fold-Down Gooseneck Trailer Hitch # 8339 designed to fit that Reese Rail Kit. view full answer...
As far as fuel efficiency goes, your best option would indeed be a performance tuner such as the Edge Juice with Attitude CTS2 Performance Tuner part # EP31507. The CTS2 Performance Tuner is one of the most innovative tuners they make for the 6.7L I6 engine in your 2014 Ram 3500. According to Edge, this tuner can offer you with increases in both horsepower and torque up to 80HP and 200TQ. They also stated that you can expect an increase in fuel economy anywhere from 3-5 MPG's depending... view full answer...
The Replacement Velcro Strip for Access TonnoSport and Vanish Covers - 1" Wide x 17' Long item # A60270 you were looking at is 1" wide and nearly identical to the A40625 you mentioned that is no longer available. The only difference is the edge is slightly tapered on the # A60270 velcro strip. The Velcro is compatible with the Access Tonnosport and Vanish tonneau covers. view full answer...
We will have a weight distribution system that will work for you, but it looks like the Reese system you referenced, # RP66560, will be rated too high for your application.
When trying to decide on a proper weight distribution (WD) system for your towing rig, you will need to know the total tongue weight (TTW) of your set-up. The total tongue weight will be a fully loaded ready to tow trailer, plus any weight located behind the rear axle of your tow vehicle. You want to use a system where... view full answer...
The rotating pin boxes like the Sidewinder Fifth Wheel King Pin with Rotating Turret by 5th Airborne, 16K # ST400-5AS16K are not compatible with the Curt Q series hitches because of the hitch head design that had a unique spherical axial bearing. That system allowed too much movement for any of the rotating pin boxes to be compatible.
In order to use a Sidewinder, you would need to use a different hitch. If you let me know what bed length you have and what series your Ram is, I can... view full answer...
It's really going to come down to where the mounting brackets for your Air Lift air springs sit and whether or not they'll block the end link brackets for your Ram. I measured the # RM-1129-124 and found that the brackets would sit 10-1/2" back and 7-1/2" over towards the outside edge of the vehicle. The end link mounting bracket for the frame would sit directly above this. You could measure from the mounting point on the rear axle to see where the bracket for the end links would sit and... view full answer...
The OEM connector for the Prodigy P2 # 90885 and Wiring Adapter # 3020-P installation on your 2001 Dodge Ram 1500 is located up under the driver's side dash a little to the left of the brake pedal. I'm attaching an installation video of this brake controller and wiring harness on a 2005 Dodge Ram 3500 that will be similar and shows where to find that connector.
Here are the things you need depending on what your truck came with (you can verify what it came with by contacting your local... view full answer...
My contact at Convert-A-Ball advises that their 10-Hole Cushioned Pintle Mounting Bar for 2-inch hitches, part # AMPC3, will provide you with your required 6 inches of drop. Their 8-hole version, part # AMPC2, will provide only 4 to 5 inches of drop.
You can use the AMPC3 mounting bar with the Convert-A-Ball Pintle Hook Combo, part # PH1. This combo kit includes a pintle hitch and three interchangeable hitch balls, 1-7/8-inch, 2-inch and 2-5/16-inch. A set of 4 bolts, nuts and washers... view full answer...
Since your 2008 Dodge Ram 2500 came from the factory with tow hooks the Roadmaster MS Base Plate Kit # 264-1A that you referenced would work for you. This kit utilizes the factory tow hook installation points as installation points for the base plate kit and even if you had the tow hooks still you would not be able to reinstall them once the # 264-1a was installed. view full answer...
You are exactly in the middle between the two sizes of the Yakima Sidebars for the Overhaul HD ladder racks. So what you'd need to do is decide if you'd rather spread the uprights out a little more or push them in closer together to match up to a Sidebar. If you'd prefer to slide them in you'd want the part # Y01153 and if you'd prefer to push out you'd need the # Y01154.
The short version has an upright range of 38-3/4 inch to 62-1/8 inch whereas the longer version has a range of 62-3/4... view full answer...
Yes, the 2-inch Class IV Curt hitch # 14361 is a confirmed fit on your 2007 Dodge Ram 1500 regular cab/shortbed pickup. This hitch installs without drilling and all required mounting hardware is included. The instructions and a helpful article are linked to aid your install.
If you also need a 4-pole wiring harness you can use kit # C56175 which includes the quick-splice connectors you'll need to splice the harness into your truck's taillight wiring.
I linked our main page for 2-inch... view full answer...
As long as your 2007 Dodge Ram 1500 has the factory wiring harness at the rear of the vehicle that the Curt T-Connector Vehicle Wiring Harness # C55381 can install into, this wiring harness will work well to replace the existing 4-Way flat connector on your vehicle. view full answer...
Truxedo states that their Lo Pro QT Soft Roll-Up Tonneau Cover # TX546601 should work as long as the rear wing on your truck does not spill over into the bed rail on the inside of the bed. The mounting brackets for this tonneau cover are designed to sit in between the bed rails of your 2005 Dodge Ram Daytona package with a wing and should not interfere with the OEM spoiler. I have included a photo showing the mounting brackets location for your reference.
According to Access they do... view full answer...
Reese under-bed installation kit # RP30074 will only accept the Reese 5th wheel trailer hitch like # RP30921. These hitches fit in the 4 pucks in the truck bed. The feet have a handle that you will turn at each foot to secure the hitch in the pucks.
In order to use a 5th wheel trailer hitch that normally fits in above the bed rails with the Elite system, you would have to use an adapter, # RP30156.
For a standard 5th wheel installation kit with above the bed rails for your 2008 Dodge... view full answer...
I spoke with my technical contact at Curt referencing the front hitch # C31017 and he gave me the following reasons why Curt states that this hitch will not fit your 2005 Dodge 3500 Laramie.
The manufacturing of the 3500 Laramie is physically slightly different than the other Dodge Ram trucks with reference to how aftermarket products can mount. With this difference the Laramie does not have a standard fit for some aftermarket products. Because the Laramie has a completely different bumper,... view full answer...
The Stromberg Carlson 2 Bike Rack, # LA-102, holds bikes by the seat tube on the frame (see photo). If your bike has a set tube that extends from the seat down to the pedals and enough room to mount the bike on the cradles of the bike rack, then this bike rack will work well for you.
There are many different frame designs for bikes with rear suspension. If your bike does not have a seat tube extending from the pedals to the seat or if the suspension interferes with the seat tube, this... view full answer...
Since flat bed trucks have a taller bed than standard trucks there won't a single hitch you could install on either truck due to the height difference. An easier solution might be to install a fifth wheel to gooseneck hitch adapter like part # CAB-C5G on your trailer so that you can tow with both trucks that have gooseneck hitches. view full answer...
Go To Results